Description
Dräger Testor 2100
With both Dräger Testor models, you can perform low or medium pressure tests (with Testor 3100 even high pressure tests). They are especially suitable for testing:
- Full face masks
- Compressed-air breathing apparatus
- Lung demand valves
- Pressure reducers
- Chemical protection suits
Training
The Dräger Academy offers an extensive training programme for professional application and correct operation of the test devices.
Easy operation
The clearly arranged control panel with two gauges, a stop watch and joystick control facilitates the test performance. You can intuitively inflate and deflate the test head, switch the measuring points and generate negative and positive pressure.
The Dräger Testor 2100 easily integrate into any workshop. The compressed air supply is located on the right-hand side; the medium pressure outlet on the left. Lung demand valves or chemical protection suits are connected via a standard thread connection. The test head is inflatable and removable to allow for mask testing in a water bath.
Approval
The Dräger Testor 2100 is suitable for leak tests according to guideline vfdb 0804.
Minimum IT requirements:
Required for the use in combination with delivered Firmware as well as a possible service administration software. The minimum required for an existing computer system is described below:
- Processor - Intel Pentium or Equivalent
- Operating System - Microsoft® Windows 98, NT (4.0), 2000, XP
- Frequency - minimum 350 MHz
- Main Storage - minimum 32 Mbyte RAM
- Free Drive Space
- - minimum 1 Gbyte (equipment software of test equipment and test data)
- - space for administration software has to be considered in addition
- VGA - colour video card/-monitor - 800 x 600 Pixel, min, 256 colours
- Free Serial connection
- CD Drive