Dräger Bump Test Station Dräger Pac (Without gas cylinder)

Dräger PAC Bump Test Station (Without Gas).

Please note that you will need to choose the correct calibration gas separately to use with this station.

Designed to perform a bump test using test gas (also known as a function test or challenge test), one Dräger Pac 6000, 6500, 8000 or 8500. Requires suitable gas mixture ( See Calibration Gas)

The Bump Test Station has no requirement of any power source and can thus be used at any location. The easy to use Bump Test Station checks whether the instrument in question is responding to a known concentration of gas. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s), confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc.

If the test is not completed successfully, the device has to be adjusted/calibrated. This calibration is capable of being carried out automatically on the Bump Test Station.

To test the device using a known gas concentration is the only way to guarantee a reliable, precise measurement and functionality against a gas hazard and to ensure correct warnings against them.

Please note this items is supplied without gas which must be purchased separately. For our full range of calibration gases please click below.

See datasheet in download below.