Menu
Cart 0

Dräger Xam 1/2/5x00 Bump Test Station (Without Gas)

8319131
  • £653.09


Dräger Xam 1/2/5x00 Bump Test Station (Without Gas)

Requires additional selection of appropriate calibration gas.

Designed to perform a bump test using test gas (also known as a function test or challenge test), for Xam 2000, 2500, 5000 & 5600. Requires suitable gas mixture - For our full range of calibration gases please click below.

The Bump Test Station has no requirement of any power source and can thus be used at any location. The easy to use Bump Test Station checks whether the instrument in question is responding to a known concentration of gas. The gas provided by the Bump Test Station flows through the dust and water filter to the sensor(s) confirming correct functionality of the gas detector ensuring compliance with country-specific requirements and regulations, standards, recommendations, etc.

If the test is not completed successfully, the device has to be adjusted/calibrated. This calibration is capable of being carried out automatically on the Bump Test Station.

To test the device using a known gas concentration is the only way to guarantee a reliable, precise measurement and functionality against a gas hazard and to ensure correct warnings against them.

Please note this items is supplied without gas which must be purchased separately.  For our full range of calibration gases please click below.

 

 


We Also Recommend